<?xml version='1.0' encoding='UTF-8'?>











<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/">
<channel>
<title>Apple - Support - Most Popular  - Color</title>
<link>http://www.apple.com/support/</link>
<description>Apple - Support - Most Popular - Apple Inc.</description>
<language>en-us</language>
<copyright>Copyright 2013 Apple Inc.</copyright>
<ttl>1440</ttl>
<pubDate>Sat, 25 May 2013 08:17:00 GMT+00:00</pubDate>
<category>Apple</category>
<generator>In house</generator>
<docs>http://rss.support.apple.com/color/popular</docs>


					<item>
					<title><![CDATA[Color 1.0.x: Entire speed-adjusted clips may render instead of the requested segments]]></title>
					<description><![CDATA[Attempting to render segments of a non-standard speed clip in Color may result in Color rendering the entire length of the clip instead.
Note: Non-standard speed or speed-adjusted clips are clips which have had their speeds altered in Final Cut Pro, either by increasing or decreasing them, so that they are not at the original 100 percent speed point.]]></description>
					<link>http://support.apple.com/kb/TS1096</link>
					<content:encoded><![CDATA[Attempting to render segments of a non-standard speed clip in Color may result in Color rendering the entire length of the clip instead.
Note: Non-standard speed or speed-adjusted clips are clips which have had their speeds altered in Final Cut Pro, either by increasing or decreasing them, so that they are not at the original 100 percent speed point.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:25:45 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS1096</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.0 and 1.0.1: Still reference image previews may show original upgraded clip instead]]></title>
					<description><![CDATA[When you use the Still Store feature to compare between different shots in a project, you may see the referenced still's original upgraded clip in preview instead of the still itself.]]></description>
					<link>http://support.apple.com/kb/TS1095</link>
					<content:encoded><![CDATA[When you use the Still Store feature to compare between different shots in a project, you may see the referenced still's original upgraded clip in preview instead of the still itself.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:44:57 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS1095</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: Remove transitions from freeze frames from Final Cut Pro sequences]]></title>
					<description><![CDATA[Freeze frames that have transitions applied to them in Final Cut Pro sequences are not sent to Color when you choose File &gt; Send To &gt; Color in Final&nbsp;Cut Pro.]]></description>
					<link>http://support.apple.com/kb/TS2870</link>
					<content:encoded><![CDATA[Freeze frames that have transitions applied to them in Final Cut Pro sequences are not sent to Color when you choose File &gt; Send To &gt; Color in Final&nbsp;Cut Pro.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:42:15 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2870</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: Some applied Color FX preset looks in a project from a previous version of Color may not appear as expected.]]></title>
					<description><![CDATA[When you open a project from a previous version of Color in Color 1.5, some applied Color FX preset looks in your project may not appear as expected.]]></description>
					<link>http://support.apple.com/kb/TS2874</link>
					<content:encoded><![CDATA[When you open a project from a previous version of Color in Color 1.5, some applied Color FX preset looks in your project may not appear as expected.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:31:23 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2874</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: 2K Cineon, DPX, and RED files may render at half resolution]]></title>
					<description><![CDATA[When rendering 2K Cineon, 2K DPX, or 2K RED media, the media may be sourced as if it were 1K. This is a result of the Render Proxy setting being set to half resolution, which is the default Render Proxy setting in Color 1.5.
 Note: This will only affect DPX and Cineon files if you have previously generated proxies.]]></description>
					<link>http://support.apple.com/kb/TS2855</link>
					<content:encoded><![CDATA[When rendering 2K Cineon, 2K DPX, or 2K RED media, the media may be sourced as if it were 1K. This is a result of the Render Proxy setting being set to half resolution, which is the default Render Proxy setting in Color 1.5.
 Note: This will only affect DPX and Cineon files if you have previously generated proxies.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:36:39 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2855</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Pro 7.0, Color 1.5: Avoid mixing RED 4K media and regular NTSC material for use with "Send to Color"]]></title>
					<description><![CDATA[Using Final Cut Pro's &quot;Send to Color&quot; feature with a sequence that includes both RED 4K media and regular NTSC material may result in the NTSC material being unusable after rendering in Color and sending back to Final&nbsp;Cut Pro.]]></description>
					<link>http://support.apple.com/kb/TS2852</link>
					<content:encoded><![CDATA[Using Final Cut Pro's &quot;Send to Color&quot; feature with a sequence that includes both RED 4K media and regular NTSC material may result in the NTSC material being unusable after rendering in Color and sending back to Final&nbsp;Cut Pro.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:41:44 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2852</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5: Rendering PAL material to ProRes 4444 introduces a gamma shift]]></title>
					<description><![CDATA[Rendering PAL material to ProRes 4444 in Color introduces a gamma shift in the resulting video file.]]></description>
					<link>http://support.apple.com/kb/TS2861</link>
					<content:encoded><![CDATA[Rendering PAL material to ProRes 4444 in Color introduces a gamma shift in the resulting video file.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:31:48 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2861</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: RED 2K to DPX file render times are longer compared to Color 1.x]]></title>
					<description><![CDATA[When rendering RED 2K media to DPX files be aware that render times in Color 1.5 are longer than in Color 1.x.]]></description>
					<link>http://support.apple.com/kb/TS2887</link>
					<content:encoded><![CDATA[When rendering RED 2K media to DPX files be aware that render times in Color 1.5 are longer than in Color 1.x.]]></content:encoded>
					<pubDate>Fri, 03 May 2013 20:18:43 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2887</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.0.x: Blue and Red channels may display incorrectly]]></title>
					<description><![CDATA[Color may incorrectly swap red and blue channels with some TIFF and DPX files.]]></description>
					<link>http://support.apple.com/kb/TS2488</link>
					<content:encoded><![CDATA[Color may incorrectly swap red and blue channels with some TIFF and DPX files.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:46:39 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2488</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: Adjustments made with the Shadow contrast slider may export to a LUT incorrectly]]></title>
					<description><![CDATA[Adjustments you make with the Shadow contrast slider may export to a LUT incorrectly.]]></description>
					<link>http://support.apple.com/kb/TS2872</link>
					<content:encoded><![CDATA[Adjustments you make with the Shadow contrast slider may export to a LUT incorrectly.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:43:00 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2872</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: Color FX nodes are set to 0 if a project created in a previous version is opened and saved in Color 1.5]]></title>
					<description><![CDATA[When you save a project in Color 1.5 that was created in a previous version of Color, and then open it again in the previous version of Color, all of the Color FX node values will be reset to 0.]]></description>
					<link>http://support.apple.com/kb/TS2871</link>
					<content:encoded><![CDATA[When you save a project in Color 1.5 that was created in a previous version of Color, and then open it again in the previous version of Color, all of the Color FX node values will be reset to 0.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:33:16 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2871</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: Freeze frames created in Final Cut Pro may preview unexpectedly]]></title>
					<description><![CDATA[If you make a freeze frame from a clip that contains variable or constant speed adjustments in Final Cut Pro, that freeze frame will preview an unexpected frame in Color.]]></description>
					<link>http://support.apple.com/kb/TS2904</link>
					<content:encoded><![CDATA[If you make a freeze frame from a clip that contains variable or constant speed adjustments in Final Cut Pro, that freeze frame will preview an unexpected frame in Color.]]></content:encoded>
					<pubDate>Tue, 28 Jul 2009 16:40:13 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2904</guid>
					</item>
					
					<item>
					<title><![CDATA[Color 1.5: Blur node applied to proxy can cause a dark halo around frame edges]]></title>
					<description><![CDATA[When you apply a blur node to a proxy clip in the Color FX room, and the spread value of the blur is increased, a dark halo effect can appear around the edges of the frame.]]></description>
					<link>http://support.apple.com/kb/TS2867</link>
					<content:encoded><![CDATA[When you apply a blur node to a proxy clip in the Color FX room, and the spread value of the blur is increased, a dark halo effect can appear around the edges of the frame.]]></content:encoded>
					<pubDate>Thu, 23 Jul 2009 15:31:01 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS2867</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5.2: Unrendered freeze frames in Color displays an unexpected frame]]></title>
					<description><![CDATA[Sending a Final Cut Pro sequence to Color which includes freeze frames, results in an unexpected frame where the freeze frame was located. This happens if the freeze frames were not rendered in Color prior to sending the sequence back to Final Cut Pro.]]></description>
					<link>http://support.apple.com/kb/TS3257</link>
					<content:encoded><![CDATA[Sending a Final Cut Pro sequence to Color which includes freeze frames, results in an unexpected frame where the freeze frame was located. This happens if the freeze frames were not rendered in Color prior to sending the sequence back to Final Cut Pro.]]></content:encoded>
					<pubDate>Wed, 24 Mar 2010 20:05:24 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS3257</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5: RED 4K media in a 2K project causes the resulting image to appear softer than the original]]></title>
					<description><![CDATA[Rendering RED 4K media in a 2K project causes the resulting image to appear softer than the original. This issue may occur with proxy support disabled, set to full resolution, or set to quarter resolution.]]></description>
					<link>http://support.apple.com/kb/TS3292</link>
					<content:encoded><![CDATA[Rendering RED 4K media in a 2K project causes the resulting image to appear softer than the original. This issue may occur with proxy support disabled, set to full resolution, or set to quarter resolution.]]></content:encoded>
					<pubDate>Wed, 31 Mar 2010 22:19:02 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS3292</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5.2: Video Output of REDCODE material clips at 97 IRE]]></title>
					<description><![CDATA[When monitoring the video output of Color using REDCODE RAW media and raising the ISO, the video output level is clipped at 97 IRE. This does not affect the rendered file levels, only the video monitoring.]]></description>
					<link>http://support.apple.com/kb/TS3260</link>
					<content:encoded><![CDATA[When monitoring the video output of Color using REDCODE RAW media and raising the ISO, the video output level is clipped at 97 IRE. This does not affect the rendered file levels, only the video monitoring.]]></content:encoded>
					<pubDate>Wed, 24 Mar 2010 20:05:50 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS3260</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5: Multiple nested multi-layer .psd sequences may cause unexpected quit]]></title>
					<description><![CDATA[Color may quit unexpectedly when you send a Final Cut Pro sequence containing more than one nested multi-layer .psd sequences.]]></description>
					<link>http://support.apple.com/kb/TS3290</link>
					<content:encoded><![CDATA[Color may quit unexpectedly when you send a Final Cut Pro sequence containing more than one nested multi-layer .psd sequences.]]></content:encoded>
					<pubDate>Wed, 31 Mar 2010 22:17:31 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS3290</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5: Upgrading a Color 1.0.x project to 1.5.x changes any existing Trackers]]></title>
					<description><![CDATA[When you open a Color 1.0.x project in Color 1.5, and if it includes Trackers, any existing Trackers in the project are changed.]]></description>
					<link>http://support.apple.com/kb/TS3263</link>
					<content:encoded><![CDATA[When you open a Color 1.0.x project in Color 1.5, and if it includes Trackers, any existing Trackers in the project are changed.]]></content:encoded>
					<pubDate>Tue, 30 Mar 2010 18:09:51 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS3263</guid>
					</item>
					
					<item>
					<title><![CDATA[Final Cut Studio (2009), Color 1.5: Anamorphic SD media appears distorted on an external monitor]]></title>
					<description><![CDATA[Anamorphic SD media (PAL and NTSC) appears letterboxed (horizontal black bars at the top and bottom of the frame) and vertically squeezed via external video output.]]></description>
					<link>http://support.apple.com/kb/TS3298</link>
					<content:encoded><![CDATA[Anamorphic SD media (PAL and NTSC) appears letterboxed (horizontal black bars at the top and bottom of the frame) and vertically squeezed via external video output.]]></content:encoded>
					<pubDate>Thu, 15 Apr 2010 17:07:17 GMT+00:00</pubDate>
					<guid>http://support.apple.com/kb/TS3298</guid>
					</item>
					
</channel>
</rss>

